Breadcrumb
To help you understand your options and make informed decisions, we’ve put together this glossary, featuring clear, straightforward definitions of common heat pump language. Use it as a quick reference whenever you encounter a term you’d like to know more about.
Heat pump systems & technology
Air handler
The indoor unit of a ducted heat pump system. It contains a coil that transfers heat between the heat pump’s refrigerant and the indoor air, as well as a blower that moves air through the home.
Auxiliary heat
A supplemental or backup heat source used with a heat pump when additional heat is needed. It may be an electric heat source or a fossil fuel-burning source like a gas furnace or boiler, in which case the term “dual fuel” (or hybrid) system may also be used.
Balance point
The outdoor temperature at which a heat pump’s heating capacity matches the amount of heat a home loses. Below this temperature, the heat pump alone may not meet the home’s full heating needs, so supplemental heat may be needed to maintain comfortable indoor temperatures.
Defrost cycle
An automatic process that removes frost and ice from a heat pump’s outdoor coil. The heat pump temporarily reverses its operation to warm the coil, melting the buildup, then returns to heating mode.
Heat pump
A heating and cooling system that uses electricity to move heat from one place to another rather than generating it. In heating mode, it moves heat into your home. In cooling mode, it reverses the process, moving heat out.
- Air-source heat pump
A heat pump that transfers heat between your home and the outdoor air. - Cold-climate heat pump
A heat pump specifically designed to provide effective heating at very low outdoor temperatures. - Ducted heat pump
A heat pump that uses a home’s ductwork to distribute warm and cool air throughout the home. - Ductless heat pump (mini-split)
A heat pump that distributes heating and cooling without ductwork, using one or more indoor units connected to an outdoor unit. - Ground-source heat pump (geothermal)
A heat pump that transfers heat between your home and the ground through a series of underground pipes. - Air-to-water heat pump
A heat pump that transfers heat from outdoor air to water, which can then be used to heat a home through radiators or other hydronic systems. - Rooftop heat pump
A heat pump with heating and cooling components installed on a building roof rather than inside or alongside the building itself. - Window heat pump
A heat pump designed to be installed in a window, providing heating and cooling for a single room or small space.
Indoor unit
The part of a heat pump system that is located inside the home. It typically contains an indoor coil and a fan that moves air across the coil. Depending on the unit, it may be wall-mounted, ceiling-mounted (called a “cassette”), or concealed within ductwork.
Outdoor unit
The part of a heat pump system that is located outside the home. It typically contains the compressor, outdoor coil, and outdoor fan, which work together to transfer heat between the unit and outdoor air.
Switchover temperature
The outdoor temperature at which a hybrid or “dual fuel” heating system is set to switch from its heat pump to a supplemental heating source such as a gas furnace or boiler. This temperature setting also considers the heat pump’s heating capacity and operating costs associated with both pieces of equipment.
System size
The heating and cooling capacity of a heat pump, typically measured in tons or BTUs per hour. Some common system sizes are 2-ton, 3-ton, and 4-ton. The appropriate system size for a home depends on its heating and cooling needs.
Thermostat
A device that controls a heat pump to maintain the desired temperature in your home. Some thermostats feature smart technology, allowing one to control the system and adjust settings remotely.
Variable speed
A heat pump feature that allows the system to meet thermostat demand not by turning on or off, but by varying its heating or cooling capacity by adjusting its operating speed.
Zone
An area or group of rooms that can be heated or cooled independently.
- Single-zone
A heat pump system in which one outdoor unit connects to one indoor unit to heat or cool a single area, or zone, of a home. - Multi-zone
A heat pump system in which one outdoor unit connects to two or more indoor units to heat or cool multiple areas, or zones, of a home.
Home performance & building science
Building envelope
The parts of a building that separate the living space from the outdoors, including walls, windows, doors, roof, and foundation. A well-insulated, air-sealed envelope reduces heat loss and heat gain, which in turn reduces the amount of heating or cooling a heat pump needs to provide.
Energy audit
An evaluation of a home’s energy use and efficiency, typically performed by an energy advisor. An audit may include inspection of the building’s envelope and heating and cooling systems, as well as a blower door test to measure airtightness and identify potential leaks. Results can identify opportunities to reduce energy use and help a heat pump operate more efficiently.
Rightsizing
The process of selecting a heat pump with the appropriate heating and cooling capacity for a home. A “load calculation” performed by a qualified technician can determine how much heating and cooling the home needs. Properly sized equipment improves efficiency, performance, and comfort.
Weatherization
Home energy upgrades that make a home more energy efficient. These include air sealing the building envelope to reduce drafts and air leakage and adding insulation to reduce heat loss and heat gain. Proper weatherization can help a heat pump operate more efficiently and improve home comfort.
Installation, contractors & programs
Electrical panel
Equipment that connects electricity from a utility, through circuit breakers, to a home’s wiring. The panel must have sufficient capacity to support the additional electrical load that a heat pump may require. Panels lacking sufficient capacity require an upgrade before equipment can be installed.
Energy advisor
A qualified professional who helps people understand their home energy use and identify and prioritize improvements. An energy advisor may help facilitate or interpret an energy audit, recommend upgrades, identify approved contractors, and advise on rebates and other incentives.
Load calculation
An assessment of heating and cooling needs based on factors like square footage, layout, windows, insulation, air leakage, and local climate. These calculations follow established standards and help determine the heating and cooling capacity a heat pump needs to operate efficiently and effectively.
Qualified contractor
A heating and cooling professional who is licensed and trained to install heat pumps according to industry standards and manufacturer requirements. Customers who wish to access Power Ahead Colorado rebates must work with professionals who qualify under Power Ahead Colorado’s contractor requirements. Customers can use the Power Ahead Colorado Contractor Finder to locate approved contractors in their area.
Qualified equipment
Heat pump equipment that meets the requirements established by a specific organization or manufacturer. Customers who wish to take advantage of rebates or other incentives offered by Power Ahead Colorado must purchase and install Power Ahead Colorado-approved equipment.
Rebate
A monetary discount that helps reduce the cost of an eligible heat pump or other energy efficiency improvement. While all rebates are incentives, not all incentives are rebates, as is the case with federal tax credits. Some Power Ahead Colorado rebates can be combined, or “stacked” with other rebates, allowing customers to save even more on the cost of a project.